LUTON HIRE CENTRE

Best quality hardwood stocks with blued spring steel blades. Brass faced to ensure accuracy and to provide protection against damage. The blade is securely fixed in place by solid rivets for long lasting durability.

Available in either of the following blade sizes: 6", 9", 12" (150mm, 225mm, 300mm)

Product codes: FAITRY6, FAITRY9, FAITRY12

This try square has a sealed rosewood stock faced with brass for extra protection against damage and to give longer life and better accuracy. It has a hardened steel blade, which is secured by three steel rivets with brass washers, preventing movement.

Available in either of the following blade sizes: 6", 9", 12" (150mm, 230mm, 300mm)

Manufacturer code: TM2200/6, TM2200/9, TM2200/12

A standard try and mitre square with lightweight die cast stock fitted with spirit level to give both horizontal or plumb readings. Black japanned finish. The steel blade has ground edges and is graduated in inches (16ths) and mm.

Blade Size: 150mm / 6"

Manufacturer code: F24ME6

Try & Mitre Square with a plastic (ABS) stock, marked in metric only on both sides of steel blade. Hole in stock for storage.

Blade Size: 200mm / 8"

Manufacturer code: 2-46-500

Hardwood stock, brass face to ensure accuracy and blued steel blade. This mitre square is used to mark off angles of 45° and 135°.

Blade Size: 250mm / 10"

Product code: FAIMS10

This mitre square has a hardwood stock and hardened steel blade. It is designed to mark out an accurate 45 degree angle. Ideal for the construction of picture frames or installation of mouldings.

Blade Size: 250mm / 10"

Manufacturer code: TMR2210

Hardwood stock with wing nut adjustment for quick blade setting. The offset slot in the blade enables a line to be drawn the full length of the blade without interference from the stock.

Size: 230mm / 9"

Manufacturer code: 0-46-702

Shock-resistant plastic moulded stock with accurately machined face. Hardened and tempered blade with blued finish. Sliding blade can be locked into position by means of chrome-plated lever.

Available in either of the following sizes: 9", 10½" (230mm, 267mm)

Manufacturer code: 0-46-529, 0-46-535

Quality hardwood stock, finely machined and shaped with brass end caps. The blued spring steel blade can be locked in position by means of a brassed wing nut.

Available in either of the following sizes: 7½", 9", 10½" (190mm, 230mm, 270mm)

Product codes: FAISB712, FAISB9, FAISB1012

This sliding bevel is made with a sealed rosewood stock. The blade is joined to the stock with a quick release brass locking lever. The slot in the hardened steel blade allows the user to accommodate a wide range of different size work pieces.

Available in either of the following sizes: 9", 10½" (230mm, 270mm)

Manufacturer codes: TM2226, TM2226/10-1/2

This combination square can be used as an outside and inside try square as well as a mitre square. It can also be used as a depth and marking gauge and as a rule or straight edge. The vial in the stock give level 45 degrees and plumb reading. A separate scriber is also fitted.

Blade Length: 300mm / 12" graduated in 32nds, 16ths and mm.

Manufacturer code: FB22ME

A versatile measuring instrument with matt black die-cast stock, brass locking screw and polished steel blade with markings clearly etched on both sides, fitted with a separate scriber. This tool can be used as a try and mitre square, depth gauge, steel rule and straight edge. Spirit level gives horizontal plumb on 45 degree readings. Centre head enables the centre of circular objects to be located.

Blade Length: 300mm / 12" graduated in 32nds, 16ths and mm.

Manufacturer code: FB225ME

This highly versatile combination square has all the uses of a standard combination square, reads any angle instantly, checks through horizontal and vertical lines, no bubbles, measures 0 -90 degrees in any quadrant. Not affected by magnetic fields, heat or cold. Lightweight stock is finished in matt black.

Blade Length: 300mm / 12" graduated in 32nds, 16ths and mm.

Manufacturer code: FB295ME

This multi-purpose combination square has a heavy-duty cast iron stock with ground faces. It can be used as an outside or inside try square, a mitre square or depth and marking gauge. The vial and stock give level 45degree and plumb reading. A separate scriber is also fitted.

Blade Length: 300mm / 12" graduated in 32nds, 16ths and mm.

Manufacturer code: FB1953ME

This combination square can be used as an outside and inside try square as well as a mitre square. It can also be used as a depth and marking gauge and as a rule or straight edge. The vial in the stock give level 45 degrees and plumb reading. A separate scriber is also fitted.

Blade Length: 150mm / 6".

Manufacturer code: F411ME

A versatile measuring instrument with matt black die cast stock, brass locking screw and polished steel blade with markings clearly etched on both sides, fitted with separate scriber. Also fitted with a steel blade, centre head & protractor set.

Blade Length: 300mm / 12".

Manufacturer code: FB285ME

A versatile instrument which combines the functions of outside and inside try square, mitre square, depth and marking gauge, spirit and plumb level, steel rule, straight edge and scriber. Precision cast zinc stock. Stainless steel blade. Graduated scale in inches and millimetres.

Blade Length: 150mm / 6"

Product code: FSC56ME

Standard multi-purpose square for use as outside and inside try square, mitre square, depth and marking gauge, steel rule, straight edge, spirit level giving horizontal 45 degree and plumb readings. The stock is a matt black rustless die-casting and is fitted with a scriber. It is fully adjustable and lockable.

Blade Length: 300mm / 12"

Product code: FSC52ME

Heavy-duty combination square for use as outside and inside try square, mitre square, depth and marking gauge, steel rule, straight edge, spirit level giving horizontal 45 degree and plumb readings. Its cast iron stock is matt black, fitted with a scriber and has ground faces for extra precision.

Blade Length: 300mm / 12"

Product code: FSC53ME

Heavy-duty combination square for use as outside and inside, try square, mitre square, depth and marking gauge, steel rule, straight edge, spirit level, giving horizontal 45 degree and plumb readings. The centre head enables the accurate location and marking of the centres of circular items. The graduated protractor head can be turned through 360 degrees for measuring and constructing angles.

Blade Length: 300mm / 12"

Product code: FSC58ME

This combination square has a cast iron stock and is therefore more robust for heavier duty use, fitted with level and scriber. Has graduations on both sides of blade in mm, 8ths and 16ths inches.

Blade Length: 300mm / 12"

Manufacturer code: 0-46-151

This combination square has a 300mm/12" rule, which is coated to resist rust. It has a diecast metal black head, heavy-duty screw and regulated vial to ensure accuracy.

Blade Length: 300mm / 12"

Manufacturer code: 2-46-028

Combination square with metal body with three machined faces. The steel blade is stamped with metric and imperial sizes and is easy to read. Fitted with a 360º vial for all round visibility and a scriber for convenience and marking out.

Blade Length: 300mm / 12"

Manufacturer code: 2-46-222